Stories
Slash Boxes
Comments

SoylentNews is people

SoylentNews is powered by your submissions, so send in your scoop. Only 18 submissions in the queue.
posted by martyb on Thursday August 11 2016, @11:32AM   Printer-friendly
from the TLA++ dept.

Forget the 60 TB SSD. Toshiba is teasing a possible 100 TB SSD:

The Flash Memory Summit saw Toshiba deliver a presentation about quad level cell (QLC) technology – adding substantially to the prospect of a product being delivered in the "near future". We have heard about this QLC (4bits/cell NAND technology) quite recently.

After Seagate tantalised us with a 60TB SSD, along comes Toshiba with a 100TB QLC SSD concept.

Flash Memory Summit attendees saw Toshiba presenters put flesh on the bones and envisage a QLC 3D SSD with a PCIe gen 3 interface and more than 100TB of capacity. It would have 3GB/sec sequential read bandwidth and 1GB/sec sequential write bandwidth. It would do random reading and writing at 50,000 and 14,000 IOPS respectively. The active state power consumption would be 9 watts, the same as a 3.5-inch, 8TB SATA 6Gbit/s disk drive, while the idle power consumption be less than 100 mWatts, compared to the disk drive's 8 watts.

Even if the "near future" isn't so near, or the final capacity does not end up at around 100 TB, it is still interesting to see 3D NAND technology enabling a serious push for 4-bits-per-cell NAND, which would normally face endurance issues.


Original Submission

 
This discussion has been archived. No new comments can be posted.
Display Options Threshold/Breakthrough Mark All as Read Mark All as Unread
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
  • (Score: 0) by Anonymous Coward on Thursday August 11 2016, @07:45PM

    by Anonymous Coward on Thursday August 11 2016, @07:45PM (#386768)

    Am I reading the cycle rate on a per cell r/e? 100?! Yuck!

  • (Score: 2) by Scruffy Beard 2 on Thursday August 11 2016, @08:01PM

    by Scruffy Beard 2 (6030) on Thursday August 11 2016, @08:01PM (#386775)

    If you divide 100TB by 4, you get 25TB in SLC mode.

    That is actually very close to the number you get when dividing the Seagate 60TB tech demo by 3 to get SLC mode.