Stories
Slash Boxes
Comments

SoylentNews is people

posted by CoolHand on Tuesday March 14 2017, @02:52AM   Printer-friendly
from the asimov's-ghost-is-disappointed dept.

El Reg reports

The family of a repair technician killed in an auto parts factory accident is suing five robotics companies they say are responsible.

In a suit [PDF] filed to the Western Michigan US District Court this week, the family of Wanda Holbrook claims that the companies that built, installed, and maintained the robotics at a trailer hitch assembly plant should be held liable for her fatal accident at the plant in 2015.

According to the lawsuit, Holbrook, a journeyman technician, was performing routine maintenance on one of the robots on the trailer hitch assembly line when the unit unexpectedly activated and attempted to load a part into the unit being repaired, crushing Holbrook's head.

Now Holbrook's estate is suing the three companies that built the robots (Fanuc America, Nachi Robotic, and Lincoln Electric) for failing to design adequate safeguards and protections into the robots. They're also suing two other companies that installed and maintained the unit (Flex-N-Gate, Prodomax) for failing to prevent an accident they say would have been avoided had safety been a higher priority.


Original Submission

 
This discussion has been archived. No new comments can be posted.
Display Options Threshold/Breakthrough Mark All as Read Mark All as Unread
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
  • (Score: 2) by Runaway1956 on Tuesday March 14 2017, @01:41PM (4 children)

    by Runaway1956 (2926) Subscriber Badge on Tuesday March 14 2017, @01:41PM (#478901) Journal

    Yep. LOTO - lock out tag out procedures are put in place for a reason. And, the tech is expected to exercise some judgement. Sometimes, you HAVE to power something up, to make adjustments - which a lot of so-called safety officers don't understand. But, still, there should be a LOTO precedure in place, and it should be observed as carefully as possible.

    Some of us have learned the hard way, which makes for some funny stories. But a fatality takes all the fun out of those funny stories.

    Starting Score:    1  point
    Karma-Bonus Modifier   +1  

    Total Score:   2  
  • (Score: 1) by Sourcery42 on Tuesday March 14 2017, @04:03PM (1 child)

    by Sourcery42 (6400) on Tuesday March 14 2017, @04:03PM (#478969)

    Should be some sort of temporary removal of energy control policy to handle such situations.

    • (Score: 2) by Runaway1956 on Tuesday March 14 2017, @05:27PM

      by Runaway1956 (2926) Subscriber Badge on Tuesday March 14 2017, @05:27PM (#479001) Journal

      Should be, but things usually aren't done that way. Our robots are powered separately from the machines they service. There are safety switches that are supposed to prevent robot movement if the machine isn't turned on and running, but those safeties can be bypassed in order to work on the robot. A central lockout that takes out EVERYTHING within a work station would be ideal. Lock that out, and nothing powered by electricity, anywhere within the work station will operate. But, then, there is water (both hot and cold) and air. Each of those needs to be locked out to ensure you can't hurt yourself while working within the station. No one actually locks out an air fitting, and we almost never lock out a water valve, but policy says we do.

      Needless to say, it can get complicated. The guy on the spot is ultimately responsible for his own safety.

  • (Score: 2) by DeathMonkey on Tuesday March 14 2017, @06:11PM (1 child)

    by DeathMonkey (1380) on Tuesday March 14 2017, @06:11PM (#479026) Journal

    Sometimes, you HAVE to power something up, to make adjustments

    In my experience, they don't like to follow the Arc-Flash policy for those situations, either.

    • (Score: 2) by Runaway1956 on Tuesday March 14 2017, @06:39PM

      by Runaway1956 (2926) Subscriber Badge on Tuesday March 14 2017, @06:39PM (#479049) Journal

      For interested readers - http://msamc.org/arcflash/Arc_Flash_Overview_print.html [msamc.org]

      We don't even have an arc-flash policy. As a rule, we throw the doors open, and everyone in maintenance crowds around, looking over each other's shoulders. In the event of a flash, the entire maintenance department will be put out of commission.

      For me, the hardest part of electrical safety, is to remember "keep one hand in your pocket". That is, don't provide the electricty with an easy path across your chest, and through your heart.

      Ehhh - I'm not an electrician. If I fry my dumb ass, maybe the wife can file a huge suit against the company. "You had my husband doing electrical work? HE'S NOT AN ELECTRICIAN!!" Alas, it will never work here. Arkansas is not a very liberal state.