Stories
Slash Boxes
Comments

SoylentNews is people

posted by cmn32480 on Wednesday June 07 2017, @10:41PM   Printer-friendly
from the sounds-like-heavy-duty-plywood dept.

Officials in Oregon have approved construction permits for the first all-wood high-rise building in the nation.

Construction on the 12-story building, called Framework, will break ground this fall in Portland's trendy and rapidly growing Pearl District and is expected to be completed by the following winter.

The decision by state and local authorities to allow construction comes after months of painstaking testing of the emerging technologies that will be used to build it, including a product called cross-laminated timber, or CLT.

To make CLT, lumber manufacturers align 2-by-4 boards in perpendicular layers and then glue them together like a giant sandwich before sliding the resulting panels into a massive press for drying. The resulting panels are stronger than traditional wood because of the cross-hatched layers; CLT can withstand horizontal and vertical pressures similar to those from a significant earthquake with minimal damage.

They are also lighter and easier to work with than regular timber, resulting in lower cost and less waste.

For this project, scientists at Portland State University and Oregon State University subjected large panels of CLT to hundreds of thousands of pounds of pressure and experimented with different methods for joining them together.

Could cross-laminated timber revive the timber industry?

Previously: Can You Build A Safe, Sustainable Skyscraper Out Of Wood?
The Case for Wooden Skyscrapers


Original Submission

 
This discussion has been archived. No new comments can be posted.
Display Options Threshold/Breakthrough Mark All as Read Mark All as Unread
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
  • (Score: 3, Interesting) by bob_super on Thursday June 08 2017, @12:14AM

    by bob_super (1357) on Thursday June 08 2017, @12:14AM (#522338)

    If you don't make it with flammable glue, and compress wood fibers to the same density as logs, they will be hard to ignite, and burn slowly...

    Starting Score:    1  point
    Moderation   +1  
       Interesting=1, Total=1
    Extra 'Interesting' Modifier   0  
    Karma-Bonus Modifier   +1  

    Total Score:   3