Stories
Slash Boxes
Comments

SoylentNews is people

SoylentNews is powered by your submissions, so send in your scoop. Only 18 submissions in the queue.
posted by Fnord666 on Tuesday July 04 2017, @01:47AM   Printer-friendly
from the DIY-FTW dept.

Submitted via IRC for TheMightyBuzzard

A handy how-to for building a homemade homebrew setup with Linux, Python, and the Raspberry Pi.

I started brewing my own beer more than 10 years ago. Like most homebrewers, I started in my kitchen making extract-based brews. This required the least equipment and still resulted in really tasty beer. Eventually I stepped up to all-grain brewing using a big cooler for my mash tun. For several years I was brewing 5 gallons at a time, but brewing 10 gallons takes the same amount of time and effort (and only requires slightly larger equipment), so a few years ago I stepped it up. After moving up to 10 gallons, I stumbled across StrangeBrew Elsinore and realized what I really needed to do was convert my whole system to be all-electric, and run it with a Raspberry Pi.

Source: https://opensource.com/article/17/7/brewing-beer-python-and-raspberry-pi


Original Submission

 
This discussion has been archived. No new comments can be posted.
Display Options Threshold/Breakthrough Mark All as Read Mark All as Unread
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
  • (Score: 2) by kaszz on Tuesday July 04 2017, @03:32AM (2 children)

    by kaszz (4211) on Tuesday July 04 2017, @03:32AM (#534670) Journal

    This brewed command line prompt is an art and has a lot of options variety. It's a total thing according to history. :-)

    Starting Score:    1  point
    Karma-Bonus Modifier   +1  

    Total Score:   2  
  • (Score: 0) by Anonymous Coward on Tuesday July 04 2017, @05:11AM (1 child)

    by Anonymous Coward on Tuesday July 04 2017, @05:11AM (#534687)

    #brewer exec sparge
    sparge initiated
    mash strain commenced.
    ERROR: LPT1 on fire!
    Repeat, Lauter Tun exceeds parameters!
    Abort, Re-sparge, or Ignore?
    &Lauter Tun is on fire.

    • (Score: 2) by MostCynical on Tuesday July 04 2017, @07:06AM

      by MostCynical (2589) on Tuesday July 04 2017, @07:06AM (#534704) Journal

      "Sensor reading out of range - is house on fire?"

      --
      "I guess once you start doubting, there's no end to it." -Batou, Ghost in the Shell: Stand Alone Complex