Stories
Slash Boxes
Comments

SoylentNews is people

posted by CoolHand on Monday October 23 2017, @03:26PM   Printer-friendly
from the gettin-better-all-the-time dept.

Researchers at University College London have developed a new receiver technology that promises data rates in excess of 10 Gbps to home users.

Slow internet speeds and the Internet 'rush hour' – the peak time when data speeds drop by up to 30% – could be history with new hardware designed and demonstrated by UCL researchers that provides consistently high-speed broadband connectivity.

[...] "To maximise the capacity of optical fibre links, data is transmitted using different wavelengths, or colours, of light. Ideally, we'd dedicate a wavelength to each subscriber to avoid the bandwidth sharing between the users. Although this is already possible using highly sensitive hardware known as coherent receivers, they are costly and only financially viable in core networks that link countries and cities.

"Their cost and complexity has so far prevented their introduction into the access networks and limits the support of multi‑Gb/s (1 Gb/s=1000 Mb/s) broadband rates available to subscribers," said co-author and Head of the Optical Networks Group, Professor Polina Bayvel (UCL Electronic & Electrical Engineering).

The new, simplified receiver retains many of the advantages of coherent receivers, but is simpler, cheaper, and smaller, requiring just a quarter of the detectors used in conventional receivers.

Simplification was achieved by adopting a coding technique to fibre access networks that was originally designed to prevent signal fading in wireless communications. This approach has the additional cost-saving benefit of using the same optical fibre for both upstream and downstream data.

"This simple receiver offers users a dedicated wavelength, so user speeds stay constant no matter how many users are online at once. It can co-exist with the current network infrastructure, potentially quadrupling the number of users that can be supported and doubling the network's transmission distance/coverage," added Dr Erkılınç.

The full report is available:
M. S. Erkılınç, D. Lavery, K. Shi, B. C. Thomsen, R. I. Killey, S. J. Savory, P. Bayvel. Bidirectional wavelength-division multiplexing transmission over installed fibre using a simplified optical coherent access transceiver. Nature Communications, 2017; 8 (1) DOI: 10.1038/s41467-017-00875-z


Original Submission

 
This discussion has been archived. No new comments can be posted.
Display Options Threshold/Breakthrough Mark All as Read Mark All as Unread
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
  • (Score: 2) by RamiK on Monday October 23 2017, @06:50PM (2 children)

    by RamiK (1813) on Monday October 23 2017, @06:50PM (#586485)

    That moment you realize you're getting ADSL2+(ATM) at 2.3\0.1MBps :(

    --
    compiling...
    Starting Score:    1  point
    Karma-Bonus Modifier   +1  

    Total Score:   2  
  • (Score: 0) by Anonymous Coward on Tuesday October 24 2017, @02:16AM (1 child)

    by Anonymous Coward on Tuesday October 24 2017, @02:16AM (#586686)

    You more than a mile from the exchange or something?

    ADSL2+ can easily to 25Mbps down, 5Mbps up (for shorter distances, anyway).

    • (Score: 0) by Anonymous Coward on Tuesday October 24 2017, @11:07AM

      by Anonymous Coward on Tuesday October 24 2017, @11:07AM (#586799)

      Your figures are 3.125MBps down 0.625MBps up which are about 150% down 600% up removed from OP. Pretty bad line noise most likely.