Stories
Slash Boxes
Comments

SoylentNews is people

posted by martyb on Tuesday April 10 2018, @11:37PM   Printer-friendly
from the Who's-afraid-of-the-big-bad-bomb? dept.

Armor-Piercing Bullet Turned to Dust When Fired at Composite Metal Foam

Essentially a metal sponge consisting of hollow metal beads within solid metal, composite metal foam (CMF) generally retains some physical properties of its base materials. While its defining characteristic is ultra-high porosity, CMF boasts 5 to 6 times greater strength as well as over 7 times higher energy absorption than previously developed metal foams. Typically created by melting aluminum around hollow metal spheres, it is impressively 70% lighter than sheet metal and 80 times more energy absorbent than steel.

The foam is claimed to be non-toxic, resistant to radiation, fire and heat resistant.

http://www.breitbart.com/tech/2016/04/21/watch-armor-piercing-bullet-turned-to-dust-when-fired-at-composite-metal-foam/

Youtube video (13 seconds) https://www.youtube.com/watch?v=lWmFu-_54fI

Related video (2:30) demonstrates automotive and other applications https://www.youtube.com/watch?v=7uE_f9rXLlk

Slightly different coverage at https://newatlas.com/metal-foam-bullets/42731/

Another Youtube video, demonstrating an explosion - https://youtu.be/yMVEQh5Akcc


Original Submission

 
This discussion has been archived. No new comments can be posted.
Display Options Threshold/Breakthrough Mark All as Read Mark All as Unread
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
  • (Score: 2) by Runaway1956 on Wednesday April 11 2018, @02:33AM (1 child)

    by Runaway1956 (2926) Subscriber Badge on Wednesday April 11 2018, @02:33AM (#665195) Journal

    It seems to be shaped in a mold. Fill the mold full of these tiny steel hollow spheres, then pour in the aluminum. Some machining after the molding, yeah, but basically you have molded parts.

    Cutting shouldn't be a problem. Any saw blade that can cut aluminum can probably cut this stuff. Expect some fouling, due to the little steel balls. They don't get very specific about the size of the hollow spheres, but I expect that your cuts will be a little rough. Unlike ceramic or similar armor, this stuff isn't especially hard. It relies on the little hollow spheres being crushed to absorb and distribute energy.

    Starting Score:    1  point
    Karma-Bonus Modifier   +1  

    Total Score:   2  
  • (Score: 2) by Arik on Wednesday April 11 2018, @03:37AM

    by Arik (4543) on Wednesday April 11 2018, @03:37AM (#665219) Journal
    Molds. I can work with molds. >:)
    --
    If laughter is the best medicine, who are the best doctors?