Stories
Slash Boxes
Comments

SoylentNews is people

posted by Fnord666 on Monday April 23 2018, @06:28AM   Printer-friendly
from the not-an-encryption-suite dept.

Submitted via IRC for TheMightyBuzzard

[Laura Kampf] found a new use for an old Zippo lighter by turning it into a carrier for her screwdriver bits. There are several multitools out there which can accept standard screwdriver bits. The problem is carrying those bits around. Leaving a few bits in your pocket is a recipe for pocket holes and missing bits.

[Laura's] solution uses her old Zippo lighter. All she needs is the case, the lighter element itself can be saved for another project. A block of aluminum is cut and sanded down to a friction fit. Laura uses a band saw and bench sander for this. The aluminum block is then drilled out to fit four bits. Small neodymium magnets are taped into the holes with double-sided tape. These magnets retain the bits, ensuring none will fall out when the lighter is opened.

Does this mean we can start calling four bits a Zippo instead of a nibble now?

Source: https://hackaday.com/2018/04/20/zippo-keeps-your-bits-safe/


Original Submission

 
This discussion has been archived. No new comments can be posted.
Display Options Threshold/Breakthrough Mark All as Read Mark All as Unread
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
  • (Score: 3, Interesting) by bradley13 on Monday April 23 2018, @08:08AM (4 children)

    by bradley13 (3053) on Monday April 23 2018, @08:08AM (#670657) Homepage Journal

    Sure, it's not actually useful. I mean, who has only four bits for their tools? I have at least a dozen that I use semi-regularly.

    That said, it's a cute little project. And I really like the idea of the small magnets. I made a wooden holder, and the bits are held in place by friction. Of course, the most frequently used holes loosen over time. The magnets would solve that problem.

    Maker videos are always nice :-)

    --
    Everyone is somebody else's weirdo.
    Starting Score:    1  point
    Moderation   +1  
       Interesting=1, Total=1
    Extra 'Interesting' Modifier   0  
    Karma-Bonus Modifier   +1  

    Total Score:   3  
  • (Score: 2) by c0lo on Monday April 23 2018, @10:29AM (3 children)

    by c0lo (156) Subscriber Badge on Monday April 23 2018, @10:29AM (#670671) Journal

    made a wooden holder, and the bits are held in place by friction

    What I would try in a hurry if in a need:
    1. Take a travel-sized hand sanitizer bottle with screw-on cap. Something like this [traveluniverse.com.au]
    2. cut it on the side on length, less the bottom. On the bottom, only score a groove to act as a hinge. Now you have a good-enough hinged "box", with the screw cap acting as a lock.
    3. start filling half of the "box" with hot glue. When you have enough for your first number of bits, stick them in that glue (while still warm/hot enough). Maybe a good idea to spray a bit of WD40 on the bits before sticking them in, it will stop the glue adhering too hard on the bits. If sticking the bits on an angle, I bet one can fit more than 4, probably 8.

    Time for the job, probably 30 mins, no metal working needed. And with the advantage of saving a Zippo ligher (I just love them).

    --
    https://www.youtube.com/watch?v=aoFiw2jMy-0 https://soylentnews.org/~MichaelDavidCrawford
    • (Score: 3, Funny) by Runaway1956 on Monday April 23 2018, @11:12AM (1 child)

      by Runaway1956 (2926) Subscriber Badge on Monday April 23 2018, @11:12AM (#670678) Journal

      Yeah, I thought something like "What a waste of a Zippo!" TFS says "an old Zippo". I wonder if the Zippo was rare, and maybe worth a couple thousand as a collector's item. And, she just destroyed the damned thing.

      • (Score: 0) by Anonymous Coward on Monday April 23 2018, @12:52PM

        by Anonymous Coward on Monday April 23 2018, @12:52PM (#670714)

        How was it destroyed? I saw nothing permanent she did to it. It looked to me like she just took the shell and put in her own insert.

    • (Score: 2) by VLM on Monday April 23 2018, @12:08PM

      by VLM (445) Subscriber Badge on Monday April 23 2018, @12:08PM (#670701)

      Or the classic altoids tin with fridge magnet material glued/stuck to the bottom of the open box.

      These bits tend not to be the best material and the whole situation is very fiddly; I'd rather spend the time with better screwdrivers. At the official desktop lab its all Wiha screwdrivers but I use cheaper stuff in other areas (toolbox, etc)