SoylentNews is people
SoylentNews
Raspberry Pi Foundation says its final farewells to 40nm with release of Compute Module 3+
The Rasperry Pi Foundation has updated its Compute Module with better thermals, an updated application processor and bucketloads of flash memory (in Pi terms, at least).
The Compute Module 3+, a System on Module (SoM) board, is part of a hardware family that's been around since 2014 with the launch of the CM1. That original rocked a single-core Arm processor clocked to 700MHz, 512MB RAM and a mighty 4GB of eMMC.
Three years later, the Compute Module 3 put in an appearance with the 1.2GHz processor of the Pi 3 and 1GB RAM. Two years on, and the Compute Module 3+ is carrying on the tradition, adding the Broadcom BCM2837B0 processor from the Pi 3B+ into the mix. [...] power supply limitations will keep the CPU at 1.2GHz instead of the 1.4GHz of the Pi 3B+.
[...] The foundation plans to keep Compute Module 3+ available until "at least" January 2026 and, in words that will be bring joy to Pi fans the world over, stated this is "the last in a line of 40nm-based Raspberry Pi products" indicating a clearing of the decks before the next generation makes an appearance.
(Score: 0) by Anonymous Coward on Tuesday January 29 2019, @07:52AM (1 child)
Am I reading it wrong, or are the specs for another machine given instead of the one the headline mentions? Have they not changed since?
(Score: 2) by Freeman on Tuesday January 29 2019, @05:50PM
The biggest change is the introduction of various Flash Memory (Not RAM) size options (4GB, 8GB, 16GB, 32GB). There is also a marked improvement in heat displacement with the new chip. There are no real performance gains made with this updated hardware. Just a slightly more stable chipset with larger sizes available and slight increases in cost for the 8GB, 16GB, and 32GB Flash Memory options.
Joshua 1:9 "Be strong and of a good courage; be not afraid, neither be thou dismayed: for the Lord thy God is with thee"