Stories
Slash Boxes
Comments

SoylentNews is people

posted by janrinok on Thursday July 25 2019, @08:34AM   Printer-friendly
from the blame-it-on-the-weather dept.

Submitted via IRC for Bytram

Too hot to handle? Raspberry Pi 4 fans left wondering if kit should come with a heatsink

Some early adopters of the Raspberry Pi 4, released on 24 June, are running into heat issues, especially with the official Pi 4 case making no provision for a heatsink or fan.

The Raspberry Pi 4 has a 1.5GHz quad-core 64-bit Arm Cortex-A72 CPU, for approximately three times the performance of the previous model. That inevitably generates more heat.

The Pi does not have a heatsink, but uses what the company calls "heat-spreading technology" to use the entire board as a kind of heatsink. This worked fine for the Pi 3, but the official FAQ for Pi 4 notes:

The Raspberry Pi 4 Model B uses the same heat-spreading technology but due to the much more powerful CPU cores is capable of higher peak power consumption than a Model 3B+. Under a continuously heavy processor workload, the Model 4B is more likely to throttle than a Model 3B+.

You can add a heatsink if you wish, and this may prevent thermal throttling by keeping the chips below the throttling temperature.

When the Pi 4 heats up beyond 80°C (176°F), the CPU is throttled to reduce the temperature and a half-full red thermometer appears on the display, if one is connected. If the temperature goes up beyond 85, the GPU, which now supports dual monitors and 4K resolution, will be throttled as well.

It is no surprise that the Pi 4 gets hotter than its predecessor, it is marketed as a viable general-purpose PC, after all.

There is an issue though: if it frequently overheats in normal use, users are not getting full performance. Longevity of the components may also be affected. We advised in our original review that "things got quite warm" when using the Pi for a few days.


Original Submission

 
This discussion has been archived. No new comments can be posted.
Display Options Threshold/Breakthrough Mark All as Read Mark All as Unread
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
  • (Score: 2) by ElizabethGreene on Thursday July 25 2019, @03:19PM

    by ElizabethGreene (6748) Subscriber Badge on Thursday July 25 2019, @03:19PM (#871077) Journal

    The kit I got (Amazon Link [amzn.to]) included self-adhesive heatsinks for the Processor, Ram, Broadcom controller, and USB 3.0 controller. It's currently running naked, no heatsinks, sitting on a desk in a 70F room crunching through a bunch of apt-get installs on crappy hotel wifi and only slightly warm to the touch.

    It is replacing an original Model B and the performance difference is giggle inducing.

    Starting Score:    1  point
    Karma-Bonus Modifier   +1  

    Total Score:   2