Stories
Slash Boxes
Comments

SoylentNews is people

posted by martyb on Tuesday January 07 2020, @12:26PM   Printer-friendly

Wi-Fi Alliance Announces Wi-Fi 6E Moniker for 802.11ax in the 6 GHz Spectrum

The FCC has been considering the opening up of the 6 GHz band (essentially, the 1.2 GHz unlicensed spectrum span just above the currently used 5 GHz band) for unlicensed operation. Wideband unlicensed channels of 160 MHz and more may become essential to achieve expected performance from 802.11ax, 802.11be, 4G LTE, and 5G NR in unlicensed spectrum. Opening up a continuous 1200 MHz chunk will enable substantial amount of new bandwidth over multiple wide bandwidth channels.

Unfortunately, even though there are no currently unlicensed users of the 6 GHz band, certain fixed wireless point-to-point long-range deployments are licensed to utilize it. Wi-Fi platform vendors such as Qualcomm and Broadcom have been confident of working with those users to prevent any interference. Their key message to the licensed incumbents is that any Wi-Fi deployment in the 6 GHz band would use LPI (low-power indoor) operation and can also implement AFC (automated frequency coordination). LPI operation, for example, may impose restrictions on the total EIRP (effective isotropically radiated power) and PSD (power spectral density) for Wi-Fi devices. This will prevent interference due to low power levels and substantial building losses. In addition, most licensed users of the spectrum have their point-to-point endpoints well above the ground (mounted atop towers and buildings), and devices rated for LPI operation are not likely to affect them. AFC involves the maintenance of a database where licensed users are tracked based on their deployment location, and any unlicensed Wi-Fi usage in that spectrum capable of interfering with the licensed users could automatically shift to a different channel.

The Wi-Fi Alliance is introducing a new terminology to distinguish upcoming Wi-Fi 6 devices that are capable of 6 GHz operation - Wi-Fi 6E. This is essentially the benefits of Wi-Fi 6 / 802.11ax (higher performance in terms of faster data rates as well as lower latency) in the 6 GHz band. Wi-Fi 6E devices are expected to make it to the market relatively quickly after regulatory approval, as it only requires changing the antenna tuning / RF front end on existing devices.

802.11be is likely to become Wi-Fi 7 and also operate in the 2.4 GHz, 5 GHz, and 6 GHz bands.

In retrospect, the new Wi-Fi naming scheme is not that bad. Or at least, it's not as bad as USB yet.

Previously: Wi-Fi Alliance Rebrands Wi-Fi Standards

Related: Netgear Introduces its First Wi-Fi 6 (802.11ax) Routers
Intel Launches a Wi-Fi 6 (802.11ax) Wireless Network Adapter


Original Submission

 
This discussion has been archived. No new comments can be posted.
Display Options Threshold/Breakthrough Mark All as Read Mark All as Unread
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
  • (Score: 0) by Anonymous Coward on Wednesday January 08 2020, @04:01PM

    by Anonymous Coward on Wednesday January 08 2020, @04:01PM (#941078)

    wah!
    "Unfortunately, even though there are no currently unlicensed users of the 6 GHz band,..."
    pluuuse, there are better ways to exercise the brain then deciphering double negatives.
    "Unfortunately, even though there are currently only licensed users of the 6 GHz band,..." yes?