Stories
Slash Boxes
Comments

SoylentNews is people

SoylentNews is powered by your submissions, so send in your scoop. Only 17 submissions in the queue.
posted by Fnord666 on Saturday February 29 2020, @06:20AM   Printer-friendly
from the ==-===-*=*-***-* dept.

Learning Morse Code The Ludwig Koch Way:

Most countries have dropped the requirement for learning Morse code to become a ham radio operator. Because of that, you might think Morse code is dead. But it isn't. Some people like the nostalgia. Some like that you can build simple equipment to send and receive Morse code. Others like that Morse code is much more reliable than voice and some older digital modes. Regardless of the reason, many people want to learn Morse code and it is still a part of the ham radio scene. The code has a reputation of being hard to learn, but it turns out that is mostly because people haven't been taught code in smart ways.

[...] If you want to learn the code, or if you want to learn it better than you know it now, the Koch method is pretty simple. If a bunch of students can learn code in 14 hours, you should be able to, as well. Even spending an hour a day, that's only two weeks.

There are plenty of resources, but one we like is LCWO (Learn CW Online — CW or Continous Wave is ham-speak for Morse code). The site costs nothing and will track your progress. Once you've learned it, you can practice text, words, callsigns, and common ham radio exchanges.

Even if you don't need Morse for a ham license anymore, it does open up new opportunities. If you don't want to do ham radio, think of all the Arduino projects you could do where the device could signal you with a blinking LED and you could command it with a single switch contact. Not that we'd use a scheme like that to count blackjack cards. We'd never do that. If you don't want to use the computer and still need a coach, you could try this 1939 code trainer.


Original Submission

 
This discussion has been archived. No new comments can be posted.
Display Options Threshold/Breakthrough Mark All as Read Mark All as Unread
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
  • (Score: 3, Interesting) by Anonymous Coward on Saturday February 29 2020, @01:21PM

    by Anonymous Coward on Saturday February 29 2020, @01:21PM (#964578)

    If you want to translate the "dept." line, I found this encoding works with one online translator. The traditional "-" characters between the "dept." words are used for "dah" in Morse...
          -- --- .-. ... .

    Morse code was used at Atari (arcade games) as part of a security-by-obscurity scheme. Here's a quote from a hardware guru, https://www.jmargolin.com/vgens/vgens.htm [jmargolin.com]

    I also used the TMS320P15 (a TMS32010 with an on-board EPROM Program Memory) in Race Drivin', mostly to provide security. I supported another team's project using the TMS320P15 for security. The TMS320P15 was supposedly hack-proof once the Security Bit was set. It wasn't. The reason I know is that in that project I put in an undocumented program that sent out the Atari copyright message in Morse Code. Because of the DSP's speed it could be received by just placing a standard AM radio near the PC Board. The program was called only by grounding an innocuously unused I/O pin during Reset. When Atari received a counterfeited game to examine, I placed an AM radio near the board, grounded the aforementioned I/O pin, gave it a Reset, and heard my Copyright Message on the radio.

    The name of that game was Road Riot.

    Starting Score:    0  points
    Moderation   +3  
       Interesting=3, Total=3
    Extra 'Interesting' Modifier   0  

    Total Score:   3