Stories
Slash Boxes
Comments

SoylentNews is people

posted by Fnord666 on Tuesday May 19 2020, @10:04AM   Printer-friendly
from the illuminating dept.

Corkscrew light promises higher optical-communication data rates:

The modern world depends on good communication. If you were one of the few who didn't believe that, the recent obsession with video conferences should have convinced you otherwise. The key for video is volume: huge streams of data facilitated by high-capacity optical-fiber communications networks.

It might surprise you to hear that, actually, optical communication is not very efficient. A recent paper shows off a laser that may allow the information density to be increased by using something called orbital angular momentum (OAM).

[...] Our low data rates are due to the limitations of how we manipulate light. Electronics and materials only respond so fast, and that sets limits on what we can do. To get around this, we use multiple tricks. For instance, when we modulate the light, we do not send a single bit but rather a single symbol that corresponds to multiple bits. Depending on how that symbol is encoded, however, you cannot increase the data rate continuously.

Imagine that we just change the light intensity. The simplest version of this is using on and off. With this system we are only sending a single bit, but the chance of mistaking a one for a zero should be quite low. We could, however, divide the light into four brightnesses: off, dim, bright, and very bright. In this case, we can send two bits per symbol. Unfortunately, it is easier to mistake neighboring intensity levels with each other, especially after the light has travelled some distance and losses have taken their toll.

The way to get around this is to encode the symbol across different properties of the light. For instance, if the phase and the brightness are modulated together, then we get four symbols by combining dim and very bright with two phases. In this case, the difference in brightness and the difference in phase are much greater, so we reduce the chance of error compared to just using amplitude alone.

This is where OAM can play a role. The easiest way to think about OAM is to imagine that the light travels in a kind of corkscrew pattern. A bit can be defined by whether it corkscrews clockwise or anti-clockwise. Along with the rotational direction, the tightness of the corkscrew can also vary. In principle, light can take on an infinite number of OAM states.

But it doesn't end there. Although there are infinite number of states, they are discrete and separate from each other—you cannot describe one OAM state by a mixture of other OAM states. This means that it is more difficult to mistake one OAM state for another (unlike the errors we make when comparing to two brightnesses). If we could but change (and detect) the OAM state of light rapidly, we would have a very efficient way to send data.

Journal Reference
Zhifeng Zhang, Xingdu Qiao, Bikashkali Midya, et al. Tunable topological charge vortex microlaser [$], Science (DOI: 10.1126/science.aba8996)


Original Submission

 
This discussion has been archived. No new comments can be posted.
Display Options Threshold/Breakthrough Mark All as Read Mark All as Unread
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
  • (Score: 0) by Anonymous Coward on Tuesday May 19 2020, @02:50PM

    by Anonymous Coward on Tuesday May 19 2020, @02:50PM (#996361)

    What do you mean it's [soylentnews.org] not [soylentnews.org] new [soylentnews.org]??

    But, it is an evolving technology.