Stories
Slash Boxes
Comments

SoylentNews is people

posted by martyb on Sunday November 18 2018, @07:17PM   Printer-friendly
from the for-today's-teens-there-has-always-been-an-ISS dept.

A 3D printer with a recycling device is headed to the International Space Station

The International Space Station's first 3D printer with its own recycling machine is en route to the orbital laboratory aboard a Northrop Grumman spacecraft.

The Cygnus spacecraft launched early Saturday morning aboard an Antares rocket, carrying 7,400 pounds of supplies to aid dozens of investigations and research projects conducted on the space station, NASA said in a news release.

The load includes the space station's first all-in-one 3D printer and recycler, known as the "Refabricator," NASA said. It will be able to take plastic materials and old 3D-printed parts on the space station and recycle them into new 3D-printer "ink" that will allow astronauts to make new tools in space.

The technology will also "greatly reduce the need to continually launch large supplies of new material and parts for repairs and maintenance," NASA said. That, in turn, should reduce the cost of the resupplying the space station.

The demand for plastic wrenches aboard the ISS will be satisfied.

Also at Space.com and Yahoo!:

The space station marks its 20th year in orbit on Tuesday. The first section launched on Nov. 20, 1998, from Kazakhstan.

2014: Open for Business: 3-D Printer Creates First Object in Space on International Space Station


Original Submission

This discussion has been archived. No new comments can be posted.
Display Options Threshold/Breakthrough Mark All as Read Mark All as Unread
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
(1)
  • (Score: 3, Interesting) by rleigh on Sunday November 18 2018, @08:10PM (2 children)

    by rleigh (4887) on Sunday November 18 2018, @08:10PM (#763598) Homepage

    After a story a few days back about how the small airborne microplastic particles produced by 3D printers were potentially harmful to health, how will this affect the astronauts? It's not like they can open a window or get that far away from it!

    • (Score: 0) by Anonymous Coward on Sunday November 18 2018, @10:00PM

      by Anonymous Coward on Sunday November 18 2018, @10:00PM (#763626)
      An enclosure and a weak exhaust with a filter is all that is needed to maintain slightly negative pressure. Home printers rarely have that, but professional ones usually have enclosures.
    • (Score: 0) by Anonymous Coward on Monday November 19 2018, @04:37AM

      by Anonymous Coward on Monday November 19 2018, @04:37AM (#763792)

      It's not like they can open a window or get that far away from it!

      No, but they can drill a hole in the hull.

  • (Score: 3, Funny) by RandomFactor on Sunday November 18 2018, @09:34PM

    by RandomFactor (3682) Subscriber Badge on Sunday November 18 2018, @09:34PM (#763612) Journal

    We need one that works on regolith, oh and one that is cool with perchlorates.

    --
    В «Правде» нет известий, в «Известиях» нет правды
  • (Score: 2) by Runaway1956 on Monday November 19 2018, @07:50AM

    by Runaway1956 (2926) Subscriber Badge on Monday November 19 2018, @07:50AM (#763816) Journal

    I suppose that plastic wrenches would be alright in a lot of applications. They wouldn't do me a lot of good, the way I use tools, in the environment that I work in. But - space. Controlled atmosphere, low humidity, generally pretty clean. Stuff doesn't oxidize, rust, anodize, or whatever like it does on earth. Dirt and scum don't accumulate on the parts, keeping moisture in. As a rule, I suspect that loosening nuts and bolts requires very little more torque than what was used to tighten them down, to start with. I could make a nylon or an ABS plastic wrench that would work pretty well for most things in such an environment. Some discipline would be required, though. Heaving on that wrench like a macho man on steroids would destroy the wrench in pretty short order.

    I'd be willing to experiment, any way.

(1)