Stories
Slash Boxes
Comments

SoylentNews is people

posted by martyb on Saturday January 02 2016, @10:43AM   Printer-friendly
from the meets-little-resistance dept.

Whatever you call it, the humble AC adapter, external power supply, plug pack, plug-in adapter, domestic mains adapter, line power adapter, wall wart, or power brick is due for significant changes next month.

From http://electronicspurchasingstrategies.com/2015/04/27/get-ready-for-the-level-vi-efficiency-regulation/

The U.S. Level VI energy-efficiency regulation, aimed at energy savings in external power supplies, goes into force on February 10, 2016, and will impact all OEMs selling into the U.S. market. The European Union (EU) also is expected to harmonize with the new efficiency standard.

This article includes a quote (& pun) from one power supply vendor,

"It's a two-pronged approach," said Johnson. "The regulation addresses active mode when the adapter is powered up and supplying power to the end product. Under the regulation, efficiency is increased by roughly five percent."

But the big change is at no load when the adapter is plugged into the wall – like a cell phone charger – and nothing is connected to it, Johnson added. "Power consumption at Level IV was .5 watt and at Level VI it's decreasing to .1 watt, which when you talk about the millions of adapters in the market it's significant in power savings."

Another article can be found at http://www.metlabs.com/blog/energy-star-2/external-power-supplies-must-meet-level-vi-energy-efficiency-requirements-for-u-s-doe-by-february-2016/

US Department of Energy has an information page with several linked documents
https://www1.eere.energy.gov/buildings/appliance_standards/rulemaking.aspx/ruleid/28
"Rulemaking for Battery Chargers and External Power Supplies Energy Conservation Standard"


Original Submission

 
This discussion has been archived. No new comments can be posted.
Display Options Threshold/Breakthrough Mark All as Read Mark All as Unread
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
  • (Score: 2) by frojack on Saturday January 02 2016, @05:22PM

    by frojack (1554) Subscriber Badge on Saturday January 02 2016, @05:22PM (#283718) Journal

    Agreed, nobody is going to switch off all the wall warts in a typical house or office. Not happening.

    On the other hand they should, in this day and age, be able to use far less than a tenth of a watt to determine if there is anything drawing current from them. Seems excessive give today's electronics.

    Where there's one wall wart, there is usually 5 more within a couple of meters. Some long forgotten. The only thing that keeps them at bay seems to be the shortage of outlets. Additional power strips just make matters worse.

    --
    No, you are mistaken. I've always had this sig.
    Starting Score:    1  point
    Karma-Bonus Modifier   +1  

    Total Score:   2