Stories
Slash Boxes
Comments

SoylentNews is people

SoylentNews is powered by your submissions, so send in your scoop. Only 19 submissions in the queue.
posted by Fnord666 on Wednesday January 10 2018, @10:22AM   Printer-friendly
from the never-enough-storage dept.

The Register asked Seagate's Director of Technology Strategy and Product Planning Jason Feist about the company's plans to use multi-actuator technology in upcoming hard disk drives. Seagate insists that the technology can double input/output operations per second (rather than increasing it by, for example, 1.8x), and says that customers have validated the concept:

Howard Marks, founder and chief scientist at Deep Storage Net said: "We've had drives with 2 positioners before (IBM 3380 - one set of heads were dedicated to inner tracks, the other to outer tracks). That was back in the day of linear voice coils so they came from opposite sides of the 14-inch platters."

He identifies a software issue with Seagate's multi-actuator single pivot design: "Most storage software including logical volume managers and file systems, are built with the knowledge that a disk drive can only have it's heads in one place at a time and their queuing logic may mismatch with the multipositioner logic." This means: "It may not double throughput for large I/Os."

It could get close though, as "I understand that Seagate is going to make these look like 2 logical drives via a driver. That should solve #1 above and let systems get 1.8-1.9X IOPS."

[...] El Reg: What are your ideas and thoughts about multi-actuator disk drives and the arguments for and against them?

Jason Feist: We are bullish on this technology. A number of key customers have validated the concept and are working closely with us on the development of the technology.

Hyperscale data center service-level agreements (SLAs) are a critical factor in defining storage deployment needs and designing next-generation technologies that efficiently support storage deployments. In order for TCO (total cost of ownership) to continue to improve, the IOPS of a disk drive need to increase along with the capacity increases we're enabling with new areal density advancements.

The small cost adder that is required for additional components to deliver this performance gain is a much more cost-effective solution than using additional drives/spindles. The hard drive and SSD have a strong relationship in a data center, and both are required to achieve capacity and performance requirements at scale.

The IOPS growth provided by Multi Actuator technology in disk drives enables this relationship to continue to scale into the future.


Original Submission

 
This discussion has been archived. No new comments can be posted.
Display Options Threshold/Breakthrough Mark All as Read Mark All as Unread
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
  • (Score: 2) by HiThere on Wednesday January 10 2018, @06:12PM

    by HiThere (866) Subscriber Badge on Wednesday January 10 2018, @06:12PM (#620548) Journal

    I like option C if it's easy to switch which "drive" is read-only. Preferable by a toggle switch on the outside of the case.

    --
    Javascript is what you use to allow unknown third parties to run software you have no idea about on your computer.
    Starting Score:    1  point
    Karma-Bonus Modifier   +1  

    Total Score:   2