SoylentNews

"exec" writes:

People already get the names wrong, so the USB group has doubled down on bad naming.

https://arstechnica.com/gadgets/2019/02/usb-3-2-is-going-to-make-the-current-usb-branding-even-worse/

USB 3.0 was straightforward enough. A USB 3.0 connection ran at 5Gb/s, and slower connections were USB 2 or even USB 1.1. The new 5Gb/s data rate was branded "SuperSpeed USB," following USB 2's 480Mb/s "High Speed" and USB 1.1's 12Mb/s "Full Speed."

But then USB 3.1 came along and muddied the waters. Its big new feature was doubling the data rate to 10Gb/s. The logical thing would have been to identify existing 5Gb/s devices as "USB 3.0" and new 10Gb/s devices as "USB 3.1." But that's not what the USB-IF did. For reasons that remain hard to understand, the decision was made to retroactively rebrand USB 3.0: 5Gb/s 3.0 connections became "USB 3.1 Gen 1," with the 10Gb/s connections being "USB 3.1 Gen 2." The consumer branding is "SuperSpeed USB 10Gbps."

What this branding meant is that many manufacturers say that a device supports "USB 3.1" even if it's only a "USB 3.1 Gen 1" device running at 5Gb/s. Meanwhile, other manufacturers do the sensible thing: they use "USB 3.0" to denote 5Gb/s devices and reserve "USB 3.1" for 10Gb/s parts.

USB 3.2 doubles down on this confusion. 5Gb/s devices are now "USB 3.2 Gen 1." 10Gb/s devices become "USB 3.2 Gen 2." And 20Gb/s devices will be... "USB 3.2 Gen 2×2." Because they work by running two 10Gb/s connections along different pairs of wires simultaneously, and it's just obvious from arithmetic that you'd number the generations "1, 2, 2×2." Perhaps they're named for powers of two, starting with zero? The consumer branding is a more reasonable "SuperSpeed USB 20Gbps."

-- submitted from IRC

Original Submission