Stories
Slash Boxes
Comments

SoylentNews is people

posted by martyb on Monday January 10 2022, @02:37PM   Printer-friendly

ROCK5 Model B RK3588 single board computer is up for pre-order for $79 and up

Some will say "finally!" After years of waiting for [the] Rockchip RK3588 processor, ROCKPi Trading Limited/Radxa got some samples for their ROCK5 Model B single board computer and has started to take pre-orders with discounted prices starting at $79 through distributors.

But let's check out the specifications first, with the octa-core Cortex-A76/A55 Pico-ITX SBC shipping with up to 16GB RAM, M.2 NVMe storage, 2.5GbE, optional WiFi 6E, 8K video output via HDMI or USB-C ports, 4K HDMI input, and more.

[...] So how much does the board cost exactly? Those are the standard prices:

  • $129 with 4GB RAM
  • $149 with 8GB RAM
  • $189 with 16GB RAM

This is getting quite close to Intel hardware, but ROCK5 Model B has some features not found in most platforms at that price including HDMI input, MIPI CSI camera interfaces, GPIO header, and 2.5GbE.

But as mentioned in the introduction you can get the board for as low as $79 by pre-ordering the board. To get this price, you'll need to pay a $5 deposit (called R3 code "Radxa ROCK5 Redeem") to reserve the board, and then you'll be able to get a $50 discount on the prices above, meaning $79 for the 4GB version, $99 with 8 GB RAM, and $139 for the model with 16GB RAM. This is only valid for one board, and the R3 code is refundable at any time before shipping if you decide you don't want to[sic] board anymore.

Beware the VAT.

Previously:
Rockchip RK3588 Datasheet Available, SBCs Coming "Soon"
CNX Software: Year 2021 in Review


Original Submission

 
This discussion has been archived. No new comments can be posted.
Display Options Threshold/Breakthrough Mark All as Read Mark All as Unread
The Fine Print: The following comments are owned by whoever posted them. We are not responsible for them in any way.
  • (Score: 3, Informative) by driverless on Tuesday January 11 2022, @04:15AM

    by driverless (4770) on Tuesday January 11 2022, @04:15AM (#1211700)

    I've always found the Pine's to be a bit... underdesigned, and not so well supported on some OSes (FreeBSD springs to mind), way too much tweaking required to get things working. I prefer the ODroids, which are also a lot cheaper than these new Pine's, at those prices you may as well go with Intel/AMD SBCs.

    Starting Score:    1  point
    Moderation   +1  
       Informative=1, Total=1
    Extra 'Informative' Modifier   0  
    Karma-Bonus Modifier   +1  

    Total Score:   3