SoylentNews is people
SoylentNews
http://www.righto.com/2023/03/8086-multiplication-microcode.html
While programmers today take multiplication for granted, most microprocessors in the 1970s could only add and subtract — multiplication required a slow and tedious loop implemented in assembly code. One of the nice features of the Intel 8086 processor (1978) was that it provided machine instructions for multiplication,2 able to multiply 8-bit or 16-bit numbers with a single instruction. Internally, the 8086 still performed a loop, but the loop was implemented in microcode: faster and transparent to the programmer. Even so, multiplication was a slow operation, about 24 to 30 times slower than addition.
In this blog post, I explain the multiplication process inside the 8086, analyze the microcode that it used, and discuss the hardware circuitry that helped it out.3 My analysis is based on reverse-engineering the 8086 from die photos. The die photo below shows the chip under a microscope. I've labeled the key functional blocks; the ones that are important to this post are darker. At the left, the ALU (Arithmetic/Logic Unit) performs the arithmetic operations at the heart of multiplication: addition and shifts. Multiplication also uses a few other hardware features: the X register, the F1 flag, and a loop counter.
(Score: 3, Interesting) by owl on Saturday March 25, @01:57AM
Brought about by the much larger transistor budget available. Just the hardware multiplier circuit for a Core 2 CPU is likely more transistors that the total transistor count quoted for the 8086 (29,000 transistors).
Lots of performance can often be found, provided there are enough transistors available to build the necessary hardware.