https://www.xda-developers.com/your-unpowered-ssd-is-slowly-losing-your-data/
SSDs have all but replaced hard drives when it comes to primary storage. They're orders of magnitude faster, more convenient, and consume less power than mechanical hard drives. That said, if you're also using SSDs for cold storage, expecting the drives lying in your drawer to work perfectly after years, you might want to rethink your strategy. Your reliable SSD could suffer from corrupted or lost data if left unpowered for extended periods. This is why many users don't consider SSDs a reliable long-term storage medium, and prefer using hard drives, magnetic tape, or M-Disc instead.
Unlike hard drives that magnetize spinning discs to store data, SSDs modify the electrical charge in NAND flash cells to represent 0 and 1. NAND flash retains data in underlying transistors even when power is removed, similar to other forms of non-volatile memory. However, the duration for which your SSD can retain data without power is the key here. Even the cheapest SSDs, say those with QLC NAND, can safely store data for about a year of being completely unpowered. More expensive TLC NAND can retain data for up to 3 years, while MLC and SLC NAND are good for 5 years and 10 years of unpowered storage, respectively.
The problem is that most consumer SSDs use only TLC or QLC NAND, so users who leave their SSDs unpowered for over a year are risking the integrity of their data. The reliability of QLC NAND has improved over the years, so you should probably consider 2–3 years of unpowered usage as the guardrails. Without power, the voltage stored in the NAND cells can be lost, either resulting in missing data or completely useless drives.
This data retention deficiency of consumer SSDs makes them an unreliable medium for long-term data storage, especially for creative professionals and researchers. HDDs can suffer from bit rot, too, due to wear and tear, but they're still more resistant to power loss. If you haven't checked your archives in a while, I'd recommend doing so at the earliest.
(Score: 2, Interesting) by Anonymous Coward on Monday December 01, @01:23AM
According to a 10 year old article, if you're going to store SSDs, write at high temperature, store at low temperature, rewrite once in a while before the data fades too much:
https://archive.is/1lW1R [archive.is]
Note the link is about SSDs that have past their TBW but the principle should still be the same, just the actual numbers different.
Also that was 10 years ago, stuff might have changed since...