SoylentNews is people
SoylentNews
https://www.xda-developers.com/your-unpowered-ssd-is-slowly-losing-your-data/
SSDs have all but replaced hard drives when it comes to primary storage. They're orders of magnitude faster, more convenient, and consume less power than mechanical hard drives. That said, if you're also using SSDs for cold storage, expecting the drives lying in your drawer to work perfectly after years, you might want to rethink your strategy. Your reliable SSD could suffer from corrupted or lost data if left unpowered for extended periods. This is why many users don't consider SSDs a reliable long-term storage medium, and prefer using hard drives, magnetic tape, or M-Disc instead.
Unlike hard drives that magnetize spinning discs to store data, SSDs modify the electrical charge in NAND flash cells to represent 0 and 1. NAND flash retains data in underlying transistors even when power is removed, similar to other forms of non-volatile memory. However, the duration for which your SSD can retain data without power is the key here. Even the cheapest SSDs, say those with QLC NAND, can safely store data for about a year of being completely unpowered. More expensive TLC NAND can retain data for up to 3 years, while MLC and SLC NAND are good for 5 years and 10 years of unpowered storage, respectively.
The problem is that most consumer SSDs use only TLC or QLC NAND, so users who leave their SSDs unpowered for over a year are risking the integrity of their data. The reliability of QLC NAND has improved over the years, so you should probably consider 2–3 years of unpowered usage as the guardrails. Without power, the voltage stored in the NAND cells can be lost, either resulting in missing data or completely useless drives.
This data retention deficiency of consumer SSDs makes them an unreliable medium for long-term data storage, especially for creative professionals and researchers. HDDs can suffer from bit rot, too, due to wear and tear, but they're still more resistant to power loss. If you haven't checked your archives in a while, I'd recommend doing so at the earliest.
(Score: 2) by aafcac on Tuesday December 02, @04:15PM
HDDs aren't perfect, but they are cheap, reasonably durable, reasonably large and you can automate most of the process of verifying, repairing and transferring the data from one drive to a new drive as appropriate. We may someday get to the point where the interconnection is stable enough that that isn't needed, but we likely won't know that we're there until a rather long time after we hit that point. We may well be there with SATA as that hasn't been changing much in terms of wiring or chips other than more or less the same thing, but faster, but I'm not ready to make the assumption that we're not going to switch to something at some point. Especially with things like nVME chips being a common thing these days.