| Title | Inside a 1 Dollar Radar Motion Sensor | |
| Date | Thursday July 04 2024, @09:34AM | |
| Author | janrinok | |
| Topic | ||
| from the dept. | ||
https://10maurycy10.github.io/projects/motion_sensor_hacking/
I recently got some cheap RCWL-0516 microwave motion sensors, mostly because I was wondering how China managed to make a radar for under a dollar:
Getting one working was quite easy, I just connected the VIN pin to 5 volts, GND to ground, and added a 1 uF decoupling capacitor on the 3V3 pin. When someone moves within ~5 meters, the OUT pin goes up to 3 volts for 3 seconds.
So it works, but how?
Generally, motion and speed sensing (doppler) radars work by sending out a continuous carrier and mixing the received signal with the transmitted carrier to create a low frequency IF signal. If reflections are coming from a moving object, the received signal will slowly drift in and out of phase with the transmitted signal, creating a beat frequency at just a few hertz. Because a motion sensor doesn't care about the exact speed, all the chip has to do is look for millivolt-level changes: all the hard work is already done.
| Links |
printed from SoylentNews, Inside a 1 Dollar Radar Motion Sensor on 2025-07-17 02:30:23